The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V.
	Automatic Bulk charge to 14.4V at maximum current of 9.0A switching to float charge at 13.74V.
	Battery charge control is simply via STOP/START push buttons, allowing battery interchange without the need to remove power from the unit or connecting/disconnecting live output.
	The battery connecting lead is made via a non reversible 2 pin 50A connector.
	The unit is supplied lead sets fitted with 8.0mm crimp terminals for connection to the battery.
	The unit is reverse connection protected and will show an error condition if START is pressed while battery reverse connection is made.
	The unit detects non battery connection and will show an error if less than 0.8V is detected at the battery terminals.
	The unit will automatically perform a desulphation charge if a battery connected exhibits a terminal voltage less than 9.0V
	Field calibration possible, no need to return the unit back to factory for calibration.
	10.0A Resettable circuit breakers are fitted to each battery connection to protect both the battery and the unit from short circuits or faults.
	Battery volts / amps and time is displayed on a three digit red 7 segment display.
	Display and Indicators brightness can be controlled from dim to very bright so display can be seen in daylight conditions.
	Clear indication of Bulk Charge, Trickle Charge, Desulphation Charge and Error conditions.
	The unit accepts a universal mains input of 80-264 VAC/47-63 Hz.
	Weight 12Kg.
	It is housed in a metal enclosure designed for bench mounting. Size 373 x 245 x 219mm (whd).
	1 Year RTB Warranty.