| TS25
MKII SPECIFICATIONS
|
|
NATO STOCK
NSN
6130-99-481-9367
Alternative
part numbers
TS25-BAS1-KIT
TS25-BAS1-CAN240
|
|
Recommended by most leading aircraft
and battery manufacturers the TS25 MKII battery charger/analyser
has a proven track record world-wide. The on-board battery
library is capable of storing data on different battery
types. |
|
Rugged and reliable – designed for busy maintenance
workshops, the TS25 MKII charger is suitable for every
industry where batteries are used. It features a software
controlled self-calibration facility which amounts to zero
downtime for calibration.
|
Dual independent channels - charge two different batteries simultaneously
or parallel charge for extra heavy-duty batteries.
Charges Up To 30V, Vented Or Sealed Lead Acid (Pb), Nickel Cadmium (NiCd)
Or Nickel Metal Hydride (NiMh) Batteries.
Flexible charge and capacity test parameters allow processing of
alternate composition batteries.
Charging Modes: Constant Current, Constant Voltage, With Auto Terminate
On Complete Charge Cycle.
Charge Current: 12A From 1.2V Up To 30V.
Discharge Current: 25A From 30V Down To 4.0V. Lower Currents Are
Available For Voltages Outside This Range.
Parallel Charge Mode Allows One Battery To Be Capacity Tested At 50A or
Charged At 24A.
Capacity Test Battery Efficiency Is displayed upon completion.
Battery Library Stores Battery Data: It may be updated by the user
changeable memory and comes pre-programmed with a list of standard and military
batteries used worldwide.
2 three digit seven segment LED displays, with LED indicators to show
modes and status of operation.
Audible Alarm Indicates Process Completion:
Software Controlled Calibration Procedure: Can be re-calibrated in-house
with minimal external equipment.
Can Be Supplied In Either 240v or 115v 50-60hz Mains Input.
Supplied As Standard In Mild Steel Powder Coated Enclosure.
Weight 46kg
Dimensions 58cm X 43cm X 23cm (H X W X D)
Download
PDF Operators Manual
| 
